Diplomo computer Lab syllabus for BEEE practical

Electrical And Electronics Engineering Practical

"L" Scheme Syllabus - Sub Code :25234

1. a. Measure current, voltage and resistance using various test meters Ammeter, Voltmeter and multi meter. b. Checking of Power Supply- SMPS.
2. Verify Ohm’s Law and Kirchoff’s Laws
3. To observe waveforms of A.C. Voltage and current on CRO. Determine amplitude and phase and understand the concepts of lagging and leading
4. To determine efficiency and voltage regulation of single phase transformer by direct loading method.
5. Draw the forward bias and reverse bias characteristics of a PN Junction diode and determine the forward resistance of the diode
6. Draw the forward and reverse bias characteristics of a Zener
7. Draw the characteristics of Common Emitter Configuration and determine its input impedance, output impedance and current gain.
8. Construct and test full- wave rectifier and bridge rectifier circuit.
9. Verify truth tables of logic gates using IC 7404, 7408, 7432, 7402, 7400,7486
10. Verify De-Morgan’s Theorems.
11. Construct Half adder and full adder circuits using ICs and verify their truth table
12. Construct Half subtractor and full sub tractor using ICs and verify their truth table
13. Verify the operation of a multiplexer and de-multiplexer using IC’s
14. Implement and Test RS, JK, T and D flip-flops.
15. Construct and test 4-bit ripple counter and observe the output waveform
16. Construct and test synchronous counter and observe the output waveform.
17. Construct and test 4-bit shift registers

"K" Scheme Lab Exercise:

1. Test the value of the resistance by using
   (i) Analog and Digital multimeter
   (ii) Color coding with and without tolerance value.
2. a)Measure current, voltage and resistance using Various test meters – Ammeter, Voltmeter and multi meter.
   b)Generate AC and DC signals using signal generator and power supply.
3. Verify Ohm’s law and Kirchoff’s law.
4. Draw the forward bias characteristics of a PN Junction diode and determine the forward resistance of the diode.
5. Draw the reverse bias characteristics of a Zener diode.
6. Draw the characteristics of Common Emitter Configuration and determine its input impedance, output impedance and current gain.
7. Construct the following circuits using Op-Amp IC 741
   (i) Inverting Amplifier
   (ii) Non – inverting Amplifier
   (iii) Adder
   (iv) Subtractor.
8. Construct and test half - wave and full - wave rectifier circuits.
9. Verify truth tables of logic gates using IC 7404, 7408, 7432, 7402, 7400 and 7486.
10. Realize the logic gates using Universal gates.
11. Realize the circuit to simplify the logic equation by using karnaugh map.
12. Verify De-Morgan’s Theorems.
13. Construct Half adder and full adder circuits using ICs and verify their truth table.
14. Construct Half subtractor and full subtractor circuits using ICs and verify their truth table.
15. Verify the operation of a multiplexer and de-multiplexer using IC’s
16. Verify the operation of a decoder and encoder circuits.
17. Implement and Test RS, JK, T and D flip-flops.
18. Construct and test 4-bit ripple counter and observe the output waveform.
19. Construct and test asynchronous decade counter and observe the output waveform.
20. Construct and test 4-bit shift registers.

Equipments/Components Required

Equipments:

Sno.	Name of the equipments	Range	Required Nos.
1	Digital Multimeter		6
2	Ammeter	(0-50) mA	6
3	Voltmeter	(0-20) V, 30 MHz	6 6
	Power supply	0-30V	6
5	Digital Trainer Kit		6
6	Bread Board		6
7	Fixed dual power Supply	0-15 V	2
8	Signal generator	1 MHz	2
9	CRO Dual Trace	30 MHz	6

Components:

Sno	Name of the components
1	Resistors	150Ω, 1KΩ, 2.2KΩ,10KΩ,2 20Ω
2	Capacitor	10μF, 4.7μF
3	PN Diode	IN4007
4	Zener Diode	Z11.1
5	Transistor	SL100,CL100
6	IC7400, IC7402, IC7404, IC7408, IC7432, IC7486
7	IC74161(Counter)
8	IC74153(MUX)
9	IC74139(DMUX)
10	IC7476 (Flip-Flop)
11	IC74194 (Shift Register)

How to create and start a blogger step by step guide by krtamilanz thank u wikihow

2

Sign in using your Google Account to get started.

3

If you do not have a Google Account, click “Get Started” to create one.

4

Enter a “Display Name” to be used to sign your blog posts and click “Continue”.

5

Click “Create Your Blog Now”

6

Select a “Blog title” and an available URL for your blog. You can check if the URL you are considering is available by clicking "Check Availability".

7

Enter the word verification and click continue.

8

Choose a starter template, which will act as the basic design/layout of your blog.

9

Click “Start Blogging”

10

You can create new blog posts, edit posts, and edit pages from under the “Posting” tab.

11

The title of your post goes in the text box next to “Title”.

12

The body of your post will get entered into the “Compose” text editor, where you will also be able to access basic text editor functions such as font size, text color, the ability to insert links.

13

You can also use the “Edit HTML” tab to insert your post in HTML format, if you prefer.

14

The “Post Options” section located underneath the “Compose” text editor will allow you to enable reader comments, HTML settings, and post the time and date.

15

You can now either select “Save Now” to save your post, “Preview” to preview your post before publishing to your blog, or “Publish Post” to publish your post directly to your newly created blog.

16

If you wish to change the design of your blog from the starter template you selected when initially creating your blog, you can do so under the “Design” tab.

17

From within the “Design Tab” you will be able to edit Page Elements, HTML, and change your template with Temple Designer.

18

If you want to adjust other settings such as who is able to view, contribute to, or comment on your blog etc, click the “Settings” tab.

19

You can adjust publishing, comments, archiving, permissions, and all other settings from within the sub-tabs located under the main “Settings” tab.

20

You can add new authors that are able to contribute to and edit your blog by clicking the “Settings” tab> “Permissions” sub-tab, and selecting “Add Authors”.

Krtamilanz_ U.S. Department of Energy Energy Alternatives India

There are approximately

 1 lakh lions,

 50 thousand tigers, 

5 lakh elephants max, 

5 lakh monkeys, 

10 crore rats,

 10 crore cats, 

10 crore dogs, 

200 crore cows, 

100 crore goats, 

50 lakh whales, 

5 lakh sharks, 

100000 crore fishes, 

100 crore birds. 

1 crore crore bugs, 

10 crore pigs, 

1 lakh crore chickens, 

1 crore crore crore worms.

Within 20 years all these will be depleted only cows, goats, crows, fishes, chickens for humans and animals and worms for fishes and chickens will remain.

At last humans, trees, grains, cows, and bees for germination of flowers will remain. Even cows wont be there.

The rich has to share their properties. My geothermal drilling technology will clean and dilute the acids and other chemicals and also provide clean Energy U.S. Department of Energy Energy Alternatives India. My electric vehicle will provide pollution free transport. My inventions will develop the world even if there is a change. 

If God is there, God is not expected to come until 3000 AD. Some atomic break through should happen by 3000 or 2500 or ASAP.

Krtamilanz-India's Position in the world

India's Position in the World

#######################

1. 1st to introduce government supported family

planning in the world.

2. Largest postal network in the world.

3. Largest livestock population.

4. Largest producer of milk.

5. Largest producer of millets in the world

6. Largest consumer of gold jewellery.

7. Largest producer of jute.

8. Largest producer of ginger.

9. Largest producer of bananas.

10. Largest producer of castor oil seeds.

11. Largest producer of mangoes.

12. Largest producer of safflower oil seeds.

13. Largest producer of papayas.

14. 2nd largest producer of tea, the first position being

held by China.

15. 2nd largest producer of sugarcane, the first position

being held by Brazil.

16. 2nd largest producer of wheat, the 1st position

being held by China.

17. 2nd largest producer of onions, the 1st position

being held by China.

18. Second largest producer of potatoes, the first

position being held by China.

19. Second largest producer of garlic, the first position

being held by China.

20. Second largest producer of rice, the first position

being held by China.

21. Second largest producer of cotton seed, the first

position being held by China.

22. Second largest producer of cement., next to China.

23. India has the second largest arable land in the

world. The USA has the largest arable land in the world.

24. India is the third largest producer and second

largest consumer of fertiliser in the world.

25. India has the largest deposits of Thorium in the

world most of which is found in Kerala.

ANNA UNIVERSITY INTERNAL ASSESSMENT MARKS,ATTANDANCE DETAILS,RESULTS | COE1.ANNAUNIV.EDU

Anna University has started of giving Internal marks for all students according to the Series exams(Internal Exam) marks.These exams were conducted by local colleges and the answer scripts was valuated by the same college staff and finally the mark details will be entered in the Anna University official web portal.After entering all the three internal exam marks,Anna university will calculate the internal marks for all affiliated college students and the Internal Mark results will be published before the publication of Annual examination Results.

please click to your anna university portal   www.coe1.annauniv.edu

nov 01 is released this details and last 10 days a portal not worked and no record found will be displayed 

but now  it is worked

so please go

Enter following details correctly

 Enter ur reg no

Enter ur dob

Enter security question 

and Login get Assesment details

by 

Urs

krtamilanz